1 Million Visitors in the Past Month: A Guide to Swapping Shocks and Struts at Home
Introduction
Are you experiencing a rough ride in your Toyota Tundra? If so, it may be time to replace your shocks and struts. This step-by-step guide will provide you with all the information you need to complete this task yourself and save money.
Materials You'll Need
- New shocks and struts
- Wrench set
- Socket set
- Spring compressor
- Safety glasses
- Gloves
Step-by-Step Instructions
1. Safety First
Before you begin, put on your safety glasses and gloves. Also, park your Tundra on a level surface and engage the parking brake.
2. Remove the Wheels
Use a wrench to loosen the lug nuts on the front wheels. Then, use a jack to raise the front of the Tundra and place jack stands under the frame for support. Remove the lug nuts and wheels.
3. Compress the Spring
Use a spring compressor to compress the coil spring on the shock or strut that you are replacing. This will allow you to remove the old shock or strut and install the new one.
4. Remove the Old Shock or Strut
Use a socket wrench to remove the bolts that hold the shock or strut in place. Once the bolts are removed, you can remove the old shock or strut.
5. Install the New Shock or Strut
Insert the new shock or strut into the mounting bracket. Then, use a socket wrench to tighten the bolts that hold the shock or strut in place.
6. Repeat on the Other Side
Repeat steps 3-5 on the other side of the Tundra.
7. Torque the Lug Nuts
Use a torque wrench to tighten the lug nuts to the manufacturer's specifications.
8. Lower the Tundra
Use a jack to lower the Tundra and remove the jack stands. Then, tighten the lug nuts to the manufacturer's specifications.
Conclusion
Replacing shocks and struts on a Toyota Tundra is a relatively easy task that can be completed in a few hours. By following the steps in this guide, you can save money and improve the ride quality of your Tundra.
Comments